Mud circulating systems TsS 200 are designated for preparation and keeping solutions for well drilling as well as for their cleaning and bringing to the required parameters before repeated application.
Mud circulating systems TsS 200 have a unit-modular construction. Design of modules in the form of dimensional blocks of the maximum factory readiness with preliminarily mounted equipment and piping elements provides high mobility during relocation of drilling rigs.
The mud circulating systems include:During installation the equipment units are installed as the second layer on top of tank units and tied-up by pipelines.
Connection between the tanks is carried out through quick-disconnect couplings using corrugated pressure-suction hoses with India rubber expansion pipe.
In the tank unit for mud preparation, there is a possibility of installation of a re-entry guide.
Mobile circulating system is equipped with the system of forced ventilation and lighting in explosion proof design. All technological tanks have connection for heating, and buildings are equipped with air heating units. All surfaces of a mobile circulating system have corrosion resisting three layer coating.
Description | Value |
---|---|
Mud circulating system, full volume, m3 | 200 |
Mud channel nominal bore, mm | 320 |
Variation range of drilling mud values: | |
- density , g/sm3 | 0,8-2,5 |
- PH value | 9-13 |
- Drilling mud degree of mineralization, kg/mЗ | 300 |
- Plastic viscosity , Pa/s | 0,05-0,025 |
- Dynamic yield point , Pa | 1-40 |
- Drilling mud maximum operating temperature, °С | 60 |
Production capacity of the system , l/sec | 60 |
Overall dimensions of one tank in the transport position, mm | 12192 х 2438 х 2590 |
Weight of a single tank, up to, t | 12 |
Thickness of tank walls, mm | 5 |
Weight-lifting capacity of the traveling hoist, t | 1 |
Internal cross section of connections between tanks | 250 |