Neftekamsk Machinery Plant
of Special Equipment
Feedback
Letter to CEO
Back

Assembly Hoist PM-40 Burlak 400

Assembly hoist PM-40 is designed for loading-uploading operations at mounting of drilling and oil-field equipment, wells construction and other operations, and loads shifting (using a hook) within closely located erection areas.

The base for the transport, installation and power-operated base of the assembly hoist can be a swamp buggy T-10MB or other similar tractors. By desire of a customer, the tractor can be completed with double glazing, an extra cabin heater, heat preparation system equipped with the starting preheater, conditioner and other.

Hoist is operated from the tractor cab; operating mechanism horns and foot levers are installed in a special hole of the cab rear wall and the driver's seat is 180° swivel with detent.

The fuel tank and counterweight load are placed in the front part of the tractor and extra counterweight load in a drawbar.

PM-40 hoist differs from PM-32 hoist by its hardened drawbar, boom and load and boom sheave block rates.

Technical Specifications
Assembly hoist type boom, tractor trailed, nonrotative with tiltable boom
Hoist erection and power base Tractor Т10М
Mechanism classification group according to ISO 4301/1 MZ
Load carrying capacity, t 40
Load moment, txm 100
Boom outreach, m:
- min. 2.5
- max. 7
Hook hoisting height, m 8
Hook hoisting speed, m/min 1.72
Hook lowering speed, m/min 2.25
Hoist traveling speed, km/h, max.:
- with load 3.7
- without load 5.3
Way climb grade, degr., max. 3
Winch double-drum, with separate drum switching, reversible with ratchet stop
Rope diameter, mm 19.5
Winch brake separate, normally closed, belt-type
Sheave blocks rate:
- load sheave block rate 8
- boom sheave block rate 6
Safety devices:
Load limiter Signaling
Hook hoisting height limiter Signaling
Boom stop Mechanical
Acceptable carrying capacity indicator (depending on the boom outreach) Visual
Swing indicator Visual
Electrical equipment:
Electric tension of the main power supply source, V 24
Overall dimensions in transit condition with folded boom
length, mm 17000
width, mm 4660
height, mm 4340
Mass, t 38,6
Assembly Hoist PM-40 Burlak 400