Assembly Hoist PM-6.3 Hydro Burlak 63 Hydro

Assembly hoist PM-6.3 hydro with the hydraulic drive of boom pitch and round trip hook block is designed for loading-uploading operations at mounting and dismounting of drilling and operational equipment, wells construction, and other operations and loads shifting (using a hook) within closely located erection sites.

The basis for transport, installation and power-operated base of the assembly hoist can be a T-10M, TM10.00E or other types of tractors. By desire of a customer, the tractor can be completed with cab double glazing, an extra cabin heater, heat preparation system equipped with the starting preheater, conditioner and others. The gearing system may be mechanical, hydromechanical or hydrostatic, as agreed with a customer.

The boom in its bare bones basic consists of two sections – the lower and upper parts, the maximum boom outreach is 6 m. One can complete the hoist with a boom with an insert. The maximum boom outreach with an insert is 9 m and the carrying capacity is 5 t.

  • Winches locate at the front part of the tractor hood. The winch drum has radial grooving and a hold-down to ensure uniform rope laying. The winch brake is normally closed frictional.
  • The hydraulic-circuit system of rigging is powered by a separate hydraulic tank.
  • The hoist is equipped with an electronic safety device OGM-240.
  • Crane operations are controlled by a joystick.

Specifications

Assembly hoist type

Boom, tractor trailed, nonrotative, with tiltable boom

Hoist erection and power base

Tractor Т10М, ТМ10.00Е

Engine power, kW (h.p.)

132 (180) - engine D180,

176 (240) - engine YaМZ-238

Boom length, m

6.7

Boom outreach from the axis of tractor driving sprocket, m:

 

      min.

 2.5

      max.

 6.3

Load carrying capacity, max., (kN)

6.3 (63)

Load moment, txm

15.75

Hook hoisting height, m

6.3

Hook hoisting speed, max., m/min                                                                            

16.8

Hoist speed control

Soft, continuous with proportional hydraulic control valve

Hoist traveling speed, km/h, max.

 

         - with load

3.5

         - without load

4.9

Winch

Double-stage planetary, with radial grooving on the drum and a holddown roll

Number of winches, pcs.

2

Drum diameter, mm

320

Line-carrying capacity of the drum, m

35

Winch brake

Multidisk frictional with selfoperative hydraulic and backup manual brake release

Rope diameter, mm

14.0

Winch drive motor

310.3.56

Pump

NSh100

Nominal pressure in hydraulic system, MPa

16

Peak rated pulling capacity on the line, kN

20

Boom sheave block rate

5

Load sheave block rate

4

Diameter of traction blocks on depressions, mm

270

Safety devices:

 

Load limiter

ОGМ-240-32

Hook hoisting height limiter

Kickout device

Boom outreach limiter

Kickout device

Safety devices and lighting power supply

On-board power network of tractor, U=24 V

Overall dimensions in transit condition with folded boom

         length, mm

         height, mm

         width, mm

 

 

9000

3300

2500

Mass (max.), t

21