of Special Equipment
Assembly Hoist PM-32 Hydro
The assembly hoist PM-32 hydro with a hydraulic drive of boom luffing and round trip hook assembly is designed for materials-handling mechanization at mounting of drilling and oil-field equipment, well site construction and other hoisting operations and loads shifting (using a hook) within closely located erection areas.
The base for transport, installation and load-carrying of the hoist can be a tractor T-10M, TM10.00E or other types of tractors. By desire of a customer, the tractor can be completed with double glazing, an extra cabin heater, heat preparation system equipped with a starting preheater, conditioner and other. The gearing system can be mechanical, hydromechanical or hydrostatic, as agreed with a customer.
Winches locate on the drawbar. Between the drawbar and tractor, arms are separated by quickrelease connections. The backweight load is located on the drawbar.
| Assembly hoist type | boom, tractor trailed, hydraulic, nonrotative with tiltable boom |
| Hoist erection and power base | Tractor Т10М |
| Mechanism classification group according to ISO 4301/1 | MZ |
| Load carrying capacity, t | 32 |
| Load moment, txm | 80 |
| Boom outreach, m: | |
| - min. | 2.5 |
| - max. | 7 |
| Hook hoisting height, m | 8.5 |
| Hook hoisting speed, m/min | 5.7 |
| Hook lowering speed, m/min | 5.7 |
| Hoist traveling speed, km/h, max.: | |
| - with load | 3.7 |
| - without load | 5.3 |
| Way climb grade, degr., max. | 3 |
| Winch | double-drum planetary, with radial grooving on the drum and a holddown roll |
| Number of winches, pcs. | 2 |
| Rope diameter, mm | 17.5 |
| Winch axial-piston hydraulic motor | 310.3.112 |
| Winches brake | multidisk frictional with hydraulic releasing of brake |
| Axial-piston pump | 310.3.112 |
| Nominal pressure in hydraulic system, MPa | 16 |
| Sheave blocks rate: | |
| - load sheave block rate | 8 |
| - boom sheave block rate | 6 |
| Rope sheave diameter, mm | 350 |
| Safety devices: | |
| Load limiter | Electromechanical |
| Hook hoisting height limiter | Electrically driven |
| Boom min. outreach limiter | Electrically driven |
| Boom stop | Mechanical |
| Acceptable carrying capacity indicator (depending on the boom outreach) | Visual |
| Swing indicator | Visual |
| Electrical equipment: | |
| Electric tension of the main power supply source, V | 24 |
| Overall dimensions in transit condition with folded boom | |
| length, mm | 17000 |
| width, mm | 4660 |
| height, mm | 4520 |
| Mass, t | 34 |
